The NME 100 is a maintenance free electric motor driven operating device for supervision and control of pole-mounted air-break switches, disconnectors and load break switches. Utilizing powerful linear motor technology, with variable speed and power options in order to match the unit to the switch.

The NME 100 is provided with a rechargeable battery solution to ensure continued operational performance beyond the loss of supplied voltage. Battery performance and battery life are very critical elements to long-term effectiveness of any remote device. To that end, Radius has designed a sophisticated solution to maximize battery life.

The NME 200 is a maintenance free electric motor driven operating device for supervision and control of pole-mounted air-break switches, load break switches and disconnectors. Utilizing rare earth magnet motor technology, the NME 200 has the power to operate even the most stubborn units with the speed to make the operation safe.

The NME 200 has an optional integrated self-sectionalizing function. When a line disturbance occurs a self-sectionalizing routine starts. The user can configure how the system works by setting various timing and reclaim parameters.

Radius NME 300 is a maintenance free electrical motor driven operating device for supervision and control of pole-mounted air-break switches and load break switches. With its powerful motor the NME 300 does a rotating movement that can operate even the most stubborn units with the speed to make the operation safe. Benefits Flexible communication Rare Earth Magnet technology Built-in test functions Proven technology Long life battery back-up DNP3 & IEC870 Protocol options Self-sectionalising option High speed operation Free from maintenance Hit & Run operation Door alarm

The NME 400 is designed to present a slim profile so that it does not extend beyond the average pole silhouet. It is also designed to allow it to be placed within the side walls of a standard H-style steel upright pole. This solution avoids unecessary damage s well as maintaining the best aesthetics for the installation.

The NMG 210 is an Argon gas driven operating device for supervision and control of pole-mounted air-break switches, disconnectors and load break switches. Utilizing compressed gas technology, the unit has the power to operate even the most stubborn units with the speed to make the operation safe.

NMG 210 has an intuitive control panel and a long-life battery solution. The unit has a flexible communication option, hit and run functionality, door alarm and LED-lights in the cabinet.

Radius FPI 100 fault passage indicator is constructed for application to distribution networks where automated switchgear are installed.

When a fault is detected the indicator operates alarm contacts for remote indication and illuminates an integral LED. Indicators placed in the distribution network aid identification of faulty sections of the network.

NMS 100 is an intelligent remote control unit designed to monitor and control from one to nine switches/disconnectors. The unit has advanced features to allow automatic sectionalizing of the HV network under fault conditions and has an option for fault current indication.

The NMS 100 is provided with a rechargeable battery solution to ensure continued operational performance beyond the loss of supplied voltage. Battery performance and battery life are very critical elements to the long-term effectiveness of any remote device.

Radius has extensive experience of providing interfaces to existing switchgear in order to increase the asset live and the functionality of our customer’s switches, disconnectors and circuit breakers. We have a staff of experienced engineers ready to undertake refurbishment/retrofitting projects of various sizes. Radius has already designed a number of retrofit solutions. Retrofit kits are available for a number of manufactures switches and circuit breakers, but if you can’t find your equipment in the list, contact us for further information.

Radius NM-CCU is a network data concentrator that connects Radius NetMan outstations with any SCADA system. By monitoring the status data from and sending signals to outstations, the NM-CCU acts as a complete control and communications system for electricity distribution networks. With its intuitive HMI, the NM-CCU also can be used as an independent data concentrator and/or primary SCADA RTU.

The FastNet is a compact RTU designed for use in electricity transmission and distribution networks. Principally for use with distribution automation equipment in the secondary electricity networks, it’s design also allows it be used as a data concentrator and/or a primary SCADA RTU.

The Radius T-Mod I/O Telemetry Module is a compact device designed to transfer control and indication data as well as analogue signals from remote sites to a central hub. The T-Mod can be used as a simple mirrored I/O between two points or can be used to connect a large number of slave units to one central master device.

Easy Local Maneuvering with the T20-panel. To experience the benefits of the local control achieved by the T20 panel and Radius flexible communication solution you can order a retrofit to boost your current overhead switchgear. The T20 control panel and the radio can be built-in in the existing cabinet. The T20 panel offers an easy maneuvering with big push buttons, LED’s indicating the status and also supports a number of alarms. For additional safety the unit also has a hit and run function, where the operator can move to a safe distance from the device before the actual switch operates.

At the heart of the NetMan system are a range of digital data Radio Network Outstation (RNO’s). This is an intelligent data radio modem, which communicates with either the NetMan RTU (in order to collect or transmit digital commands), an analogue input unit (which monitors up to 8 analogue input channels) or an external DNP3 device. In built diagnostics allows the user to test the bit error rate (BER) of any radio path, either during commissioning or during maintenance.

The RTU-16D card is designed to work with the RNO 301 and RNO 401. Each card provides 16 digital inputs and 16 digital outputs. Each digital input consists of a bi-polar opto-isolated connection, with an LED indication to be able to see at a glance the status of the input. Digital outputs are driven through isolating relays, again each output is supported by an LED to determine it’s status.

The Radius PDR 121 is an advanced digital data radio modem designed to offer wide area coverage for remote control telemetry and SCADA type network applications. The interface is via an RS232 port for data connection. The data radio can offer up to 19.2kbps on air data rate and is designed for both point-to- multipoint data telemetry networks and peer-to-peer networks in the VHF and UHF bands.

The Radius PDR 221 is an advanced digital data radio modem designed to offer wide area coverage for remote control telemetry and SCADA type network applications. Interface is via an RS232 port for data connection. The data radio can offer up to 19.2kbps on air data rate and is designed for both point to multi-point data telemetry networks and peer-to-peer networks in the VHF and UHF bands.

The HSC 100 is specifically designed to provide a high level of security against loss of telemetry data in a SCADA network. The HSC 100 monitors data traffic to and from the data radio master site and determines whether the current master data radio is experiencing communication problems. It will then switch over to another master data radio in order to maintain system reliabilty

To further protect the assets connected to the PDR radio data network Radius provides the Radio Network Diagnostics tool RND 100 to protect the integrity of that system.

The RND 100 is a software tool, which works in conjunction with the PDR data radio to give the user complete control through a ’realtime’ overview of their entire radio network. Thus allowing the users to increase their system performance

The Uni-View SCADA system gives the customer full control over their assets and the configuration tools are easy to use. Uni-View provides a secure supervision and control system for reduction of costs, improved productivity and quality. At the later date the system can be complemented with remote terminal units (RTU) or programmable logic controllers (PLC) from any manufacturer.