>
Fully Redundant Radio Controller for hot-switching from main to standby data radio
The HSC 100 is specifically designed to provide a high level of security against loss of telemetry data in a SCADA network. The HSC 100 monitors data traffic to and from the data radio master site and determines whether the current master data radio is experiencing communication problems. It will then switch over to another master data radio in order to maintain system reliabilty.

Benefits
|
Technical Information |
|
|
Cabinet |
|
|
Material |
Painted Steel |
|
Size |
H600 x W400 x D210mm |
|
Weight |
15 kg / 6.8 lb (including radios) |
|
Classification |
IP 45 |
|
Temperature Range |
+5oC to +55oC |
|
Power Supply |
110/230 VAC |
|
Power Consumption |
Max 7 W Radio when the radio receives |
|
Connection |
Terminal black. MCB fuse protected |
|
Serial Interface - RS232 |
|
| Three Wires | Rx/Tx/GND |
| Connection | DB9 Female, Wired as DCE (modem) |
| I/O | |
| Radio Switch Input |
Isolated 10-70 VDC. Flank triggered positive |
| Connection | Terminal block |
| Indication Output | Potential free contact. NO/NC selectable by wiring |
| Connection | Terminal block |
| Configuration Interface |
|
| Configuration Software | Standard Windows Terminal Program |
| Data Rate | Selectable 1200/9600/57600 bps 57600 bps default |
| Connection | RE232 DB9 female, Wired as DCE (modem) |
| Connection | Terminal block |
| LED Indicators | |
| LED indicators | Main Radio Active/ Standby Radio Active/ Auto Switch/ ON/OFF |
| Diagnostic Interface | |
| Diagnostic Software | Radius Radio Networking Diagnostic (RND) |
| Data Rate |
57600 bps |
| Connection | RS232 DB9 Female Wired as DGE (modem) |
| RF Interface | |
| Antenna Connection | N-Female, 1 or 2 connectors selectable |
| Compliances | |
| Compliances | CE and LVD directives |
| Accessories | |
| Accessories | See PDR product range accessories |
Printed on: 11 March 2010 16:20